dental machine operating principles

The punch and die during tableting by the pressure, common bearing steel (such as crl5 etc.) production, and

heat-treated to increase its hardness.

Many types of punch, punch tablet shape determined by the desired shape. Press the structure and shape of the

die can be divided into round, shaped (including polygonal and curved);

Punch the shape of a flat-shaped resin teeth cross-section, bevel-shaped, shallow concave, deep concave and integrated

shape. Flat-shaped, bevel-shaped punch for pressing flat cylinder-shaped tablets,

Shallow concave biconvex tablets for pressing, deep concave mainly for press-coated tablets of the chip,

integrated shape mainly used to suppress shaped plate-shaped. In order to facilitate the identification and

services

Used drugs in the end face of the die can also be engraved the name of the drug, dosage and vertical and

horizontal lines and other signs. Suppression of different doses of tablets, you should select the

appropriate size of the die

.

(2) tablet press tablet press dental supply companies working process of the work process can be divided into the following steps:

① undershoot punch position (its working position facing up) into the Central die hole in the bottom die

hole, seal the hole bottom mold;

② The Araliaceae is to fill in the hole in the mold drugs;

③ punch on the red parts (its working position down) from the falling upper die hole in the die hole and

down a certain stroke, the powder into tablets;

④ ascend out of the hole punch, punch up the tablets under the top of the hole in the mold, to complete a

tabletting process;

⑤ undershoot down in place, ready for the next fill.

(3) tablet tablets principle mechanism

① dose control. Tablets have various requirements of different doses, the large dose regulation is

accomplished by choosing different diameters of the punch die to be achieved, if the diameter 6mm

, 8mm, 11.5mm, 12mm, etc. punch. Die size is selected, the tiny dosage adjustment by adjusting the lower

punch inserted into the depth of the hole in the mold, thus changing the back cover

After the actual length of the die hole, adjust the die hole filling volume of the drug. Therefore, in the

tableting machine should have under the Diamond Burs regulation of the die hole punch in the original location of the

institution,

Dose adjustment in order to meet requirements. Because different batches of powder preparation total

hematocrit differences, this regulation is necessary.

At a dose control, the operation principle of the feeder also has considerable effects, such drugs are by

weight of particulate, free-rolled into the die hole, its loading condition

More loose. If using multiple compulsive way into the environment, the die hole will be filled with more

drugs, filling the situation is more dense.

② tablet thickness and compaction control. The dose is determined according to pharmacopoeia prescription

and can not be changed. For storage, preservation and disintegration time requirements,

Tabletting pressure of a dose is dental instruments also a requirement, it will influence the actual thickness and appearance of

the tablet. Tableting pressure regulation is essential. This is done by

Adjusting the upper punch holes in the mold downlink capacity to achieve. Some compression tableting machine

during operation only on the red down, but also to act as a lower washed by

Relative motion upper and lower punches together to complete the tabletting process. But mostly by adjusting

the pressure regulator on the red down the amount of pressure regulating agencies to implement and control.